Novastar VX1000

Descriptions détaillées

The VX1000 is NovaStar's new all-in-one controller that integrates video processing and video control into one box. It features 10 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX1000 unit can drive up to 6.5 million pixels, with the maximum output width and height up to 10,240 pixels and 8192 pixels, respectively, which is ideal for ultra-wide and ultra-high LED screen applications.

The VX1000 is capable of receiving a variety of video signals and processing high-resolution 4K×1K@60Hz images. In addition, the device features stepless output scaling, low latency, 3D, pixel-level brightness and chroma calibration and more, to present you with an excellent image display experience.

What's more, the VX1000 can work with NovaStar's supreme software NovaLCT and V-Can to greatly facilitate your in-field operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update.

Thanks to its powerful video processing and sending capabilities and other outstanding features, the VX1000 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch LED screen

Specifications

• Input connectors
  • 1x HDMI 1.4 (IN & LOOP)
  • 1x HDMI 1.4 − 1x DVI (IN & LOOP)
  • 1x DVI − 1x 3G-SDI (IN & LOOP)
  • 1x 10G optical fiber port (OPT1)

• Output connectors
  • 10x Gigabit Ethernet ports
  • A single device unit drives up to 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
  • 2x Fiber outputs
  • OPT 1 copies the output on 10 Ethernet ports. OPT 2 copies or backs up the output on 10 Ethernet ports.
  • 1x HDMI 1.3 For monitoring or video output
• Self-adaptive OPT 1 for either video input or sending card output
• Audio input and output
  • Audio input accompanied with HDMI input source
  • Audio output via a multifunction card
  • Output volume adjustment supported

• Low latency
  • Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled.
• 3D function
  • Work with the EMT200 3D emitter and matched 3D glasses to present a 3D visual experience.
• All-round color adjustment
  • Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and Gamma
• Up to 4 units cascaded for image mosaic
  • Three working modes
  • Video Controller
  • Fiber Converter
  • Bypass
• Output synchronization
  • An internal input source or external Genlock can
  • be used as the sync source to ensure the output
  • images of all cascaded units in sync
• Powerful video processing
  • Based on SuperView III image quality processing technologies to provide stepless output scaling.
  • One-click full screen display
  • Free input cropping
• Easy preset saving and loading
  • Up to 10 user-defined presets supported
  • Load a preset by simply pressing one button
• Multiple kinds of hot backup
  • Backup between devices
  • Backup between Ethernet ports
• Mosaic input source supported
  • The mosaic source is composed of several input
  • connectors of the same type.
• 3x layers
  • Adjustable layer size and position
  • Adjustable layer priority
• Pixel level brightness and chroma calibration
  • Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality
• Multiple operation modes
  • Control the device as you wish via V-Can, NovaLCT or device front panel knob and buttons.

Appearance

• LCD screen :  Display the device status, menus, submenus and messages.
• Knob 
  • Rotate the knob to select a menu item or adjust the parameter value.
  • Press the knob to confirm the setting or operation
• ESC button : Exit the current menu or cancel an operation.
• Control Area 
  • Open or close a layer (main layer and PIP layers), and show the layer status.
    • Status LEDs:
      • On (blue): The layer is opened.
      • Flashing (blue): The layer is being edited.
      • On (white): The layer is closed
  • SCALE: A shortcut button for the full screen function. Press the button to make the layer of the lowest priority fill the entire screen.
  • Status LEDs:
    • On (blue): Full screen scaling is turned on.
    • On (white): Full screen scaling is turned off.
• Input source buttons : Show the input source status and switch the layer input source
• Status LEDs:
  • On (blue): An input source is accessed.
  • Flashing (blue): The input source is not accessed but used by the layer
  • On (white): The input source is not accessed or the input source is abnorma
• Shortcut function buttons
  • PRESET: Access the preset settings menu.
  • TEST: Access the test pattern menu.
  • Freeze: Freeze the output image.
  • FN: A customizable button

Input Connectors 

• 3G-SDI : x1
  • ST-424 (3G), ST-292 (HD) and ST-259 (SD) standard video inputs supported
  • Max. input resolution: 1920×1080@60Hz
  • Deinterlacing processing supported
  • 3G-SDI loop output supported
  • DOES NOT support input resolution and bit depth settings.
• HDMI 1.4 : x2
  • Max. input resolution: 3840×1080@60Hz or 3840×2160@30Hz
  • HDCP 1.4 compliant
  • Mosaic of two HDMI 1.4 inputs supported
  • Custom resolutions supported
    • Max. width: 4092 pixels (4092×1136@60Hz)
    • Max. height: 3981 pixels (1060×3981@60Hz)
  • Loop output supported on HDMI 1.4 1
  • DOES NOT support interlaced signal inputs
• DVI (HDMI 1.4) : x2
  • Max. input resolution: 3840×1080@60Hz or 3840×2160@30Hz 
  • HDCP 1.4 compliant
  • Custom resolutions supported
    • Max. width: 4092 pixels (4092×1136@60Hz)
    • Max. height: 3981 pixels (1060×3981@60Hz)
  • Mosaic of two DVI inputs supported
  • Loop output supported on DVI 1
  • DOES NOT support interlaced signal inputs

Output Connectors

• Ethernet ports : x10
  • igabit Ethernet ports
  • Max. loading capacity: 6.5 million pixels
  • Max. width: 10,240 pixels
  • Max. height: 8192 pixels
  • Ethernet ports 1 and 2 support audio output. When you use a multifunction card to parse the audio, be sure to connect the card to Ethernet port 1 or 2.
  • Status LEDs:
    • The top left one indicates the connection status.
      • On: The port is well connected.
      • Flashing: The port is not well connected, such as loose connection.
      • Off: The port is not connected.
    • The top right one indicates the communication status.
      • On: The Ethernet cable is short-circuited.
      • Flashing: The communication is good and data is being transmitted.
      • Off: No data transmission
• HDMI 1.3 : x1
  • Support monitor and video output modes.
  • The output resolution is adjustable

Optical Fiber Ports

• OPT : x2

10G optical fiber ports

• OPT 1: Self-adaptive, either for video input or for output
  • When the device is connected with a fiber converter, the port is used
  • as an output connector.
  • When the device is connected with a video processor, the port is used
  • as an input connector.
  • Max. capacity: 1x 4K×1K@60Hz or 2x 2K×1K@60Hz video inputs
• OPT 2: For output only, with copy and backup modes
• OPT 2 copies or backs up the output on 10 Ethernet ports

• Single mode OPT module description:
  • Hot swappable
  • Transmission rate: 9.95 Gbit/s to 11.3 Gbit/s
  • Wavelength: 1310 nm
  • Transmission distance: 10 km
• OPT fiber selection:
  •  Model: OS1/OS2
  • Transmission mode: Single-mode twin-core
  • Cable diameter: 9/125 μm
  • Connector type: LC
  • Insertion loss: ≤ 0.3 dB
  • Return loss: ≥ 45 dB
• Multi-mode OPT module description:
  • Hot swappable
  • Transmission rate: 9.95 Gbit/s to 11.3 Gbit/s
  • Wavelength: 850 nm
  • Transmission distance: 300 m
• OPT fiber selection:
  • Model: OM3/OM4
  • Transmission mode: Multi-mode twin-core
  • Cable diameter: 50/125 μm
  • Connector type: LC
  • Insertion loss: ≤ 0.2 dB
  • Return loss: ≥ 45 dB

Control Connectors 

• Ethernet : x1
  • Connect to the control PC or router.
  • Status LEDs:
  • The top left one indicates the connection status.
    • On: The port is well connected.
    • Flashing: The port is not well connected, such as loose connection.
    • Off: The port is not connected.
  • The top right one indicates the communication status.
    • On: The Ethernet cable is short-circuited.
    • Flashing: The communication is good and data is being transmitted.
    • Off: No data transmission

• USB : x2
  • USB 2.0 (Type-B):
  • Connect to the control PC.
  • Input connector for device cascading
  • USB 2.0 (Type-A): Output connector for device cascading
• GENLOCK IN-LOOP : x1
  • Connect to an external sync signal.
  • Accepts bi-level and tri-level signals.
  • IN: Accept the sync signal.
  • LOOP: Loop the sync signal.

Specifications 

• Electrical Parameters
  • Power connector : 100-240V ~, 1.6A, 50/60Hz
    Rated power consumption : 28W
• Operating Environment
  • Temperature : 0°C to 45°C
  • Humidity : 20% RH to 90% RH, non-condensing

• Storage Environment 
  • Temperature :–20°C to +70°C
  • Humidity : 10% RH to 95% RH, non-condensing

• Physical Specifications
  • Dimensions : 483.6 mm × 351.2 mm × 50.1 mm
  • Net Weight : 4kg